*/
15076177660
网站首页 关于我们/About Us
产品优势/Design of the products
产品中心/Products
联系我们/Contacts

产品优势/Advantage of the products

产品优势/Advantage of the products

噪音信息 - 过于嘈杂的噪音有多严重?

Noise Information - How Serious Can Excessive Noise Be?

噪音水平在70分贝以上的范围内对一些人来说会产生厌烦心里。

在8小时内暴露于80分贝以上的水平可能会导致听力受损,而在同样的时间内,暴露于90分贝以上的水平很可能会导致听力受损。

当噪声水平在8小时内超过100分贝时,可能会出现严重的听力受损。

120分贝被认为是人类的痛阈值,当达到150分贝时,可能会导致耳膜破裂。

噪声造成的损害不仅仅局限于听力丧失。研究表明,持续暴露于高水平噪音中可能会导致压力、高血压,甚至心血管问题。

Noise levels in the range of over 70 decibels (dB) can cause annoyance for some people.

Exposure to levels above 80 dB for 8 hours may result in hearing loss, while exposure to levels above 90 dB for the same amount of time is likely to cause hearing damage.

When noise levels surpass 100 dB for 8 hours, serious hearing damage is possible.

120 dB is considered the human pain threshold, and eardrum rupture can occur at 150 dB.

Noise-induced damage goes beyond hearing loss. Studies have indicated that sustained exposure to high levels of noise can lead to stress, hypertension, and even cardiovascular problems.

 

产品优势

Advantage of Products

 

空气排放的过度噪音不仅会使人分心,还可能会带来安全风险。高水平的噪音可能会对人体造成各种损害。我们的消音器是降低噪音和保护员工安全的重要工具。

我们的消声器采用了特殊的设计原理,即分离空气流并让其自我反射来减少过度噪音。当气体高速进人消音器时,会将其重定向为更小的空气流,反向流会反弹到消音器的对面,使得两条流体的速度相撞,减少了噪音但不影响机器性能。

我们的消音器在以下方面表现卓越:流量大、耐压高、降噪效果好。我们采用了分流技术,将空气流分为多个较小的流体,以减少流体速度和噪音,同时不影响空气流量,能够在高压环境下表现出优异的性能,并且能够承受高压气体的冲击和振动,最大耐压可达100kg。消音器可以有效地降低噪音,同时不影响机器性能和流量,使得机器运行更加舒适和安静。

根据对未装备消声器产品和已安装的排气筒进行的测试,我们的消音器可以将噪音水平从未装消音器时的97-121 dB降至消声器时的81-84 dB,最高可降低37 dB。平均而言,噪音水平降低了17-25 dB。

我们的公司还率先提出了“换芯不换新”的消音器理念,保证消音器外壳可以重复利用,不仅可以节约成本,而且对环境更加友好。选择我们的公司,我们承诺向您提供高质量、高效、可靠的消音产品,并为整个环境保护做出贡献。

Excessive noise emissions in the air not only distract people but also pose safety risks. Our mufflers and silencer is an important tool for reducing noise and protecting the safety of employees. High levels of noise can cause various damages to the human body。

Our silencer adopts a special design principle of separating airflow and allowing it to self-reflect to reduce excessive noise. When the air enters the silencer at high speed, it is redirected into a smaller airflow, and the reverse flow bounces back to the opposite side of the silencer, causing the speed of the two fluid fronts to collide, reducing noise without affecting machine performance.

Our silencer performs outstandingly in the following aspects: large flow rate, high pressure resistance, and good noise reduction effect. We use a splitting technology to divide the airflow into multiple smaller fluids to reduce fluid velocity and noise without affecting air volume, capable of excellent performance under high-pressure environments, and of withstanding the impact and vibration of high-pressure air, with a maximum pressure resistance of up to 100kg. The silencer can effectively reduce noise while not affecting machine performance and air volume, making machine operation more comfortable and quiet.

According to the tests on both uninstalled silencer products and installed exhaust pipes, our silencer can reduce noise levels from 97-121 dB without the silencer to 81-84 dB with the silencer installed, with a maximum noise reduction of up to 37 dB. Overall, noise levels are reduced by an average of 17-25 dB.

Our company has also pioneered the "change the core, not the new" silencer concept, which ensures that the silencer housing can be reused, not only saving costs but also being more environmentally friendly. By choosing our company, we promise to provide you with high-quality, efficient, and reliable silencer products, and to contribute to protecting the environment as a whole.